The internal () and external () diameters of a Shelby sampler are 48 mm and 52 mm, respectively. The area ratio () of the sampler (in %, round off to two decimal places) is ____________
GATE CE 2021 (S2) — Question 31
Foundation EngineeringGround improvement techniquesNAT1 markEasy
A GATE question every morning
One real past-paper question every morning for your branch, answer hidden until you tap. Free on Telegram.
More on Ground improvement techniques
- GATE CE 2023 (S2) · Q18A standard penetration test (SPT) was carried out at a location by using a manually operated hammer dropping system with 50% efficiency. Th…
- GATE CE 2022 (S2) · Q31The inside diameter of a sampler tube is 50 mm. The inside diameter of the cutting edge is kept such that the Inside Clearance Ratio (ICR)…
- GATE CE 2022 (S1) · Q33At a site, Static Cone Penetration Test was carried out. The measured point (tip) resistance q c was 1000 kPa at a certain depth. The frict…

