A soil sample was consolidated at a cell pressure of 20 kPa and a back pressure of 10 kPa for 24 hours during a consolidated undrained (CU) triaxial test. The cell pressure was increased to 30 kPa on the next day and it resulted in the development of pore water pressure of 1 kPa. The soil sample failed when the axial stress was gradually increased to 50 kPa. The pore water pressure at failure was recorded as 21 kPa. The value of Skempton’s pore pressure parameter B for the soil sample is ______________ (rounded off to 2 decimal places).
GATE CE 2024 (S1) — Question 55
Soil MechanicsOne-dimensional consolidation, time rate of consolidationNAT2 marksEasy
A GATE question every morning
One real past-paper question every morning for your branch, answer hidden until you tap. Free on Telegram.
More on One-dimensional consolidation, time rate of consolidation
- GATE CE 2025 (S2) · Q47In the context of shear strength of soil, which of the following statements is/are CORRECT?
- GATE CE 2025 (S1) · Q17The results of a consolidated drained triaxial test on a normally consolidated clay are shown in the figure. The angle of internal friction…
- GATE CE 2024 (S2) · Q23Which one of the following saturated fine-grained soils can attain a negative Skempton’s pore pressure coefficient (A)?
- GATE CE 2024 (S2) · Q55A drained triaxial test was conducted on a saturated sand specimen using a stress-path triaxial testing system. The specimen failed when th…
- GATE CE 2023 (S2) · Q32An unconfined compression strength test was conducted on a cohesive soil. The test specimen failed at an axial stress of 76 kPa. The undrai…
- GATE CE 2023 (S2) · Q41In the given figure, Point O indicates the stress point of a soil element at initial non-hydrostatic stress condition. For the stress path…

