The flow depth for a discharge of 10 m/s in a wide rectangular channel is 2.0 m. Assume that the flow is uniform. If the discharge is doubled, the flow depth (in m) in this channel is _________ (rounded off to two decimal places).
GATE CE 2026 (S2) — Question 55
HydraulicsChannel Hydraulics – Energy-depth relationships, specific energy, critical flow, hydraulic jump, uniform flow, gradually varied flow and water surface profilesNAT2 marksMedium
A GATE question every morning
One real past-paper question every morning for your branch, answer hidden until you tap. Free on Telegram.
More on Channel Hydraulics – Energy-depth relationships, specific energy, critical flow, hydraulic jump, uniform flow, gradually varied flow and water surface profiles
- GATE CE 2026 (S2) · Q52Width (in m) of a rectangular channel required to carry a discharge of 96 m 3/s at a critical depth of 9.8 m is (rounded off to two decimal…
- GATE CE 2026 (S1) · Q23Gradually Varied Flow (GVF) profiles in open channels given in Column 1 are to be matched with the water surface slopes in Column 2 in the…
- GATE CE 2026 (S1) · Q40For a hydraulic jump formed in a rectangular horizontal channel, the sequent depth ratio is 2. The Froude number of supercritical stream is
- GATE CE 2026 (S1) · Q54A wide unlined channel carries sediment-free water. The depth of water is 1 m. The specific weight of water is 10 kN/m 3. To prevent scouri…
- GATE CE 2025 (S2) · Q16A hydraulic jump occurs in an open channel when the slope of the channel changes from .
- GATE CE 2025 (S2) · Q42Consider flow in a long and very wide rectangular open channel. Width of the channel can be considered as infinity compared to the depth of…

