GATE CE 2022 (S1) — Question 38

Steel StructuresDesign of tension and compression members, beams and beam-columns, column basesMCQ2 marks · −2/3 if wrongMedium

A weld is used for joining an angle section ISA 100 mm × 100 mm × 10 mm to a gusset plate of thickness 15 mm to transmit a tensile load. The permissible stress in the angle is 150 MPa and the permissible shear stress on the section through the throat of the fillet weld is 108 MPa. The location of the centroid of the angle is represented by \(C_{yy}\) in the figure, where \(C_{yy}\) = 28.4 mm. The area of cross-section of the angle is 1903 mm\(^2\). Assuming the effective throat thickness of the weld to be 0.7 times the given weld size, the lengths \(L_1\) and \(L_2\) (rounded-off to the nearest integer) of the weld required to transmit a load equal to the full strength of the tension member are, respectively
Question image
  1. A
    541 mm and 214 mm
  2. B
    214 mm and 541 mm
  3. C
    380 mm and 151 mm
  4. D
    151 mm and 380 mm
Practise the full 2022-S1 paper
Challenge a friend: WhatsApp Telegram
From RENYXERAThis week's 10-question challengeSame 10 past-GATE questions for everyone this week — see where you stand.
Practise more on Design of tension and compression members, beams and beam-columns, column basesTimed, in the real exam interface · free to start

A GATE question every morning

One real past-paper question every morning for your branch, answer hidden until you tap. Free on Telegram.

Join
Stuck? Ask in the student group