A 5.0 m wide rectangular channel carries a discharge of 10 m/s at a depth of 1.5 m under uniform flow. To produce critical flow conditions without affecting the upstream conditions, the channel bottom elevation should be raised (in m) by __________________ (rounded off to 2 decimal places).
Assume that there is no loss of head at the raise, kinetic energy correction factor is 1.0, and acceleration due to gravity is 9.81 m/s.
GATE CE 2025 (S1) — Question 62
HydraulicsChannel Hydraulics – Energy-depth relationships, specific energy, critical flow, hydraulic jump, uniform flow, gradually varied flow and water surface profilesNAT2 marksMedium
A GATE question every morning
One real past-paper question every morning for your branch, answer hidden until you tap. Free on Telegram.
More on Channel Hydraulics – Energy-depth relationships, specific energy, critical flow, hydraulic jump, uniform flow, gradually varied flow and water surface profiles
- GATE CE 2026 (S2) · Q52Width (in m) of a rectangular channel required to carry a discharge of 96 m 3/s at a critical depth of 9.8 m is (rounded off to two decimal…
- GATE CE 2026 (S2) · Q55The flow depth for a discharge of 10 m 3/s in a wide rectangular channel is 2.0 m. Assume that the flow is uniform. If the discharge is dou…
- GATE CE 2026 (S1) · Q23Gradually Varied Flow (GVF) profiles in open channels given in Column 1 are to be matched with the water surface slopes in Column 2 in the…
- GATE CE 2026 (S1) · Q40For a hydraulic jump formed in a rectangular horizontal channel, the sequent depth ratio is 2. The Froude number of supercritical stream is
- GATE CE 2026 (S1) · Q54A wide unlined channel carries sediment-free water. The depth of water is 1 m. The specific weight of water is 10 kN/m 3. To prevent scouri…
- GATE CE 2025 (S2) · Q16A hydraulic jump occurs in an open channel when the slope of the channel changes from .

