A non-pipelined instruction execution unit that operates at 1.6 GHz clock takes an average of 5 clock cycles to complete the execution of an instruction. To improve the performance, the system was pipelined with a goal of achieving an average throughput of one instruction per clock cycle. However, it could operate only at 1.2 GHz due to pipeline overheads. While executing a program in the pipelined design, 30% of instructions encountered a stall of 2 cycles due to pipeline hazards. The speed-up obtained by the pipelined design over the non-pipelined one for this program is ________. (rounded off to two decimal places)
Note: 1G =
GATE CS 2026 (Afternoon) — Question 57
Computer Organization and Architecture (COA)Instruction Pipelining, Performance, Hazard ManagementNAT2 marksMedium
A GATE question every morning
One real past-paper question every morning for your branch, answer hidden until you tap. Free on Telegram.
More on Instruction Pipelining, Performance, Hazard Management
- GATE CS 2026 (Forenoon) · Q16Which one of the following dependencies among the register operands of different instructions can cause a data hazard in a pipelined proces…
- GATE CS 2026 (Forenoon) · Q60The EX stage of a pipelined processor performs the memory read operations for LOAD instructions, and the operations for the arithmetic and…
- GATE CS 2025 (Afternoon) · Q56A 5-stage instruction pipeline has stage delays of 180, 250, 150, 170, and 250, respectively, in nanoseconds. The delay of an inter-stage l…
- GATE CS 2025 (Afternoon) · Q61An application executes 6.4 10 8 number of instructions in 6.3 seconds. There are four types of instructions, the details of which are give…
- GATE CS 2024 (Forenoon) · Q30Consider a 5-stage pipelined processor with Instruction Fetch (IF), Instruction Decode (ID), Execute (EX), Memory Access (MEM), and Registe…
- GATE CS 2024 (Forenoon) · Q55The baseline execution time of a program on a 2 GHz single core machine is 100 nanoseconds (ns). The code corresponding to 90% of the execu…

