Subject analysis · 2017–2026
Computer Organization and Architecture (COA)
Every GATE CS question on Computer Organization and Architecture (COA), with how the marks are spread across years and topics.
Questions
72
6 topics
Avg marks / year
11.5
115 marks over 10 years
Peak year
2025
18 marks
Trend
Rising
+93% last 3 yrs
Marks per year
Both shifts counted where there were two · peak highlighted
avg 11.5
16
9
3
9
13
7
6
16
18
18
'17'18'19'20'21'22'23'24'25'26
Topic share
Share of Computer Organization and Architecture (COA)'s 115 marks
6
topics
- Memory Hierarchy41%
- Instruction Pipelining, Performance, Hazard Management24%
- Machine Instructions & Addressing Modes21%
- I/O Interfaces8%
- ALU, Control Unit Design, Data-Path Operations3%
- Main Memory & Virtual Memory Mechanics3%
Topic × year heatmap
Marks from each topic in each year — darker is heavier. Topics that light up every column are the safest bets.
| '17 | '18 | '19 | '20 | '21 | '22 | '23 | '24 | '25 | '26 | |
|---|---|---|---|---|---|---|---|---|---|---|
| Memory Hierarchy | 11 | 2 | 3 | 3 | 4 | 4 | 2 | 4 | 8 | 6 |
| Instruction Pipelining, Performance, Hazard Management | 2 | 2 | 2 | 4 | 2 | 1 | 6 | 4 | 5 | |
| Machine Instructions & Addressing Modes | 3 | 2 | 2 | 4 | 2 | 4 | 3 | 4 | ||
| I/O Interfaces | 1 | 1 | 1 | 1 | 1 | 2 | 1 | 1 | ||
| ALU, Control Unit Design, Data-Path Operations | 1 | 1 | 2 | |||||||
| Main Memory & Virtual Memory Mechanics | 1 | 2 |
All 72 Computer Organization and Architecture (COA) questions
2026 11 questions · 18 marks
- FN · Q14Match each addressing mode in List I with a data element or an element of a data structure (in a high-level language) in List II : List I P. Immediate Q. Indir…Machine Instructions & Addressing Modes · MCQ · 1 mark
- FN · Q15Consider a processor P whose instruction set architecture is the load-store architecture. The instruction format is such that the first operand of any instruct…Machine Instructions & Addressing Modes · MCQ · 1 mark
- FN · Q16Which one of the following dependencies among the register operands of different instructions can cause a data hazard in a pipelined processor?Instruction Pipelining, Performance, Hazard Management · MCQ · 1 mark
- FN · Q38The size of the physical address space of a processor is 2 32 bytes. The capacity of a cache memory unit is 2 23 bytes. The cache block size is 128 bytes. The…Memory Hierarchy · MCQ · 2 marks
- FN · Q54Consider a system that has a cache memory unit and a memory management unit (MMU). The address input to the cache memory is a physical address. The MMU has a t…Main Memory & Virtual Memory Mechanics · MSQ · 2 marks
- FN · Q60The EX stage of a pipelined processor performs the memory read operations for LOAD instructions, and the operations for the arithmetic and logic instructions.…Instruction Pipelining, Performance, Hazard Management · NAT · 2 marks
- AN · Q18Consider the following two statements about interrupt handling mechanisms in a CPU. S1: In non-vectored interrupt mechanism, it usually takes more time to star…I/O Interfaces · MCQ · 1 mark
- AN · Q44Consider a processor that has 16 general purpose registers and it uses 2-byte instruction format for all its instructions. Variable-sized opcodes are permitted…Machine Instructions & Addressing Modes · MCQ · 2 marks
- AN · Q52Consider a system with a processor and a 4 KB direct mapped cache with block size of 16 bytes. The system has a 16 MB physical memory. Four words P, Q, R, and…Memory Hierarchy · MSQ · 2 marks
- AN · Q56Consider a system with 1 MB physical memory and a word length of 1 byte. The system uses a direct mapped cache, with block numbers starting from 0. The word wi…Memory Hierarchy · NAT · 2 marks
- AN · Q57A non-pipelined instruction execution unit that operates at 1.6 GHz clock takes an average of 5 clock cycles to complete the execution of an instruction. To im…Instruction Pipelining, Performance, Hazard Management · NAT · 2 marks
2025 11 questions · 18 marks
- FN · Q11Suppose a program is running on a non-pipelined single processor computer system. The computer is connected to an external device that can interrupt the proces…I/O Interfaces · MCQ · 1 mark
- FN · Q27A partial data path of a processor is given in the figure, where RA, RB, and RZ are 32-bit registers. Which option(s) is/are CORRECT related to arithmetic oper…ALU, Control Unit Design, Data-Path Operations · MSQ · 1 mark
- FN · Q36Consider a memory system with 1 M bytes of main memory and 16 K bytes of cache memory. Assume that the processor generates 20-bit memory address, and the cache…Memory Hierarchy · MCQ · 2 marks
- FN · Q37A processor has 64 general-purpose registers and 50 distinct instruction types. An instruction is encoded in 32-bits. What is the maximum number of bits that c…Machine Instructions & Addressing Modes · MCQ · 2 marks
- FN · Q53A computer has a memory hierarchy consisting of two-level cache (L1 and L2) and a main memory. If the processor needs to access data from memory, it first look…Memory Hierarchy · NAT · 2 marks
- AN · Q28Which of the following is/are part of an Instruction Set Architecture of a processor?Machine Instructions & Addressing Modes · MSQ · 1 mark
- AN · Q32The following two signed 2's complement numbers (multiplicand M and multiplier Q) are being multiplied using Booth's algorithm: M : 1100 1101 1110 1101 and Q:…ALU, Control Unit Design, Data-Path Operations · NAT · 1 mark
- AN · Q39For a direct-mapped cache, 4 bits are used for the tag field and 12 bits are used to index into a cache block. The size of each cache block is one byte. Assume…Memory Hierarchy · MCQ · 2 marks
- AN · Q55Given a computing system with two levels of cache (L1 and L2) and a main memory. The first level (L1) cache access time is 1 nanosecond (ns) and the “hit rate”…Memory Hierarchy · NAT · 2 marks
- AN · Q56A 5-stage instruction pipeline has stage delays of 180, 250, 150, 170, and 250, respectively, in nanoseconds. The delay of an inter-stage latch is 10 nanosecon…Instruction Pipelining, Performance, Hazard Management · NAT · 2 marks
- AN · Q61An application executes 6.4 10 8 number of instructions in 6.3 seconds. There are four types of instructions, the details of which are given in the table. The…Instruction Pipelining, Performance, Hazard Management · NAT · 2 marks
2024 10 questions · 16 marks
- FN · Q15Which one of the following statements is FALSE?I/O Interfaces · MCQ · 1 mark
- FN · Q30Consider a 5-stage pipelined processor with Instruction Fetch (IF), Instruction Decode (ID), Execute (EX), Memory Access (MEM), and Register Writeback (WB) sta…Instruction Pipelining, Performance, Hazard Management · MSQ · 1 mark
- FN · Q53Consider two set-associative cache memory architectures: WBC , which uses the write back policy, and WTC , which uses the write through policy. Both of them us…Memory Hierarchy · MSQ · 2 marks
- FN · Q55The baseline execution time of a program on a 2 GHz single core machine is 100 nanoseconds (ns). The code corresponding to 90% of the execution time can be ful…Instruction Pipelining, Performance, Hazard Management · NAT · 2 marks
- FN · Q56A given program has 25% load/store instructions. Suppose the ideal CPI (cycles per instruction) without any memory stalls is 2. The program exhibits 2% miss ra…Memory Hierarchy · NAT · 2 marks
- AN · Q11Consider a computer with a 4 MHz processor. Its DMA controller can transfer 8 bytes in 1 cycle from a device to main memory through cycle stealing at regular i…I/O Interfaces · MCQ · 1 mark
- AN · Q31An instruction format has the following structure: Instruction Number: Opcode destination reg, source reg-1, source reg-2 Consider the following sequence of in…Instruction Pipelining, Performance, Hazard Management · MSQ · 1 mark
- AN · Q57A processor with 16 general purpose registers uses a 32-bit instruction format. The instruction format consists of an opcode field, an addressing mode field, t…Machine Instructions & Addressing Modes · NAT · 2 marks
- AN · Q58A non-pipelined instruction execution unit operating at 2GHz takes an average of 6 cycles to execute an instruction of a program P. The unit is then redesigned…Instruction Pipelining, Performance, Hazard Management · NAT · 2 marks
- AN · Q61A processor uses a 32-bit instruction format and supports byte-addressable memory access. The ISA of the processor has 150 distinct instructions. The instructi…Machine Instructions & Addressing Modes · NAT · 2 marks
2023 4 questions · 6 marks
- FN · Q33Consider a 3-stage pipelined processor having a delay of 10 ns (nanoseconds), 20 ns, and 14 ns, for the first, second, and the third stages, respectively. Assu…Instruction Pipelining, Performance, Hazard Management · NAT · 1 mark
- FN · Q34A keyboard connected to a computer is used at a rate of 1 keystroke per second. The computer system polls the keyboard every 10 ms (milli seconds) to check for…I/O Interfaces · NAT · 1 mark
- FN · Q41Consider the given C-code and its corresponding assembly code, with a few operands U1–U4 being unknown. Some useful information as well as the semantics of eac…Machine Instructions & Addressing Modes · MCQ · 2 marks
- FN · Q64An 8-way set associative cache of size 64 KB (1 KB = 1024 bytes) is used in a system with 32-bit address. The address is sub-divided into TAG, INDEX, and BLOCK…Memory Hierarchy · NAT · 2 marks
2022 5 questions · 7 marks
- FN · Q17Which one of the following facilitates transfer of bulk data from hard disk to main memory with the highest throughput?I/O Interfaces · MCQ · 1 mark
- FN · Q24Let WB and WT be two set associative cache organizations that use LRU algorithm for cache block replacement. WB is a write back cache and WT is a write through…Memory Hierarchy · MSQ · 1 mark
- FN · Q33A cache memory that has a hit rate of 0.8 has an access latency 10 ns and miss penalty 100 ns. An optimization is done on the cache to reduce the miss rate. Ho…Memory Hierarchy · NAT · 1 mark
- FN · Q54Consider a system with 2 KB direct mapped data cache with a block size of 64 bytes. The system has a physical address space of 64 KB and a word length of 16 bi…Memory Hierarchy · MSQ · 2 marks
- FN · Q61A processor X 1 operating at 2 GHz has a standard 5-stage RISC instruction pipeline having a base CPI (cycles per instruction) of one without any pipeline haza…Instruction Pipelining, Performance, Hazard Management · NAT · 2 marks
2021 8 questions · 13 marks
- FN · Q32Consider a computer system with a byte-addressable primary memory of size 2 32 bytes. Assume the computer system has a direct-mapped cache of size 32 KB (1 KB…Memory Hierarchy · NAT · 1 mark
- FN · Q63A five-stage pipeline has stage delays of 150, 120, 150, 160 and 140 nanoseconds. The registers that are used between the pipeline stages have a delay of 5 nan…Instruction Pipelining, Performance, Hazard Management · NAT · 2 marks
- FN · Q65Consider the following instruction sequence where registers R1, R2 and R3 are general purpose and MEMORY[X] denotes the content at the memory location X. Assum…Machine Instructions & Addressing Modes · NAT · 2 marks
- AN · Q29Consider a set-associative cache of size 2 KB (1 KB = 2 10 bytes) with cache block size of 64 bytes. Assume that the cache is byte-addressable and a 32-bit add…Memory Hierarchy · NAT · 1 mark
- AN · Q30Consider a computer system with DMA support. The DMA module is transferring one 8-bit character in one CPU cycle from a device to memory through cycle stealing…I/O Interfaces · NAT · 1 mark
- AN · Q37Assume a two-level inclusive cache hierarchy, L1 and L2, where L2 is the larger of the two. Consider the following statements. S 1 : Read misses in a write thr…Memory Hierarchy · MCQ · 2 marks
- AN · Q54If the numerical value of a 2-byte unsigned integer on a little endian computer is 255 more than that on a big endian computer, which of the following choices…Machine Instructions & Addressing Modes · MSQ · 2 marks
- AN · Q63Consider a pipelined processor with 5 stages. Instruction Fetch (IF), Instruction Decode (ID), Execute (EX), Memory Access (MEM), and Write Back (WB). Each sta…Instruction Pipelining, Performance, Hazard Management · NAT · 2 marks
2020 6 questions · 9 marks
- FN · Q13Consider the following statements: I. Daisy chaining is used to assign priorities in attending interrupts. II. When a device raises a vectored interrupt, the C…I/O Interfaces · MCQ · 1 mark
- FN · Q14Consider the following data path diagram. Consider an instruction: R0 R1 + R2. The following steps are used to execute it over the given data path. Assume that…ALU, Control Unit Design, Data-Path Operations · MCQ · 1 mark
- FN · Q31A direct mapped cache memory of 1 MB has a block size of 256 bytes. The cache has an access time of 3 ns and a hit rate of 94%. During a cache miss, it takes 2…Memory Hierarchy · NAT · 1 mark
- FN · Q40A computer system with a word length of 32 bits has a 16 MB byte-addressable main memory and a 64 KB, 4-way set associative cache memory with a block size of 2…Memory Hierarchy · MCQ · 2 marks
- FN · Q53Consider a non-pipelined processor operating at 2.5 GHz. It takes 5 clock cycles to complete an instruction. You are going to make a 5-stage pipeline out of th…Instruction Pipelining, Performance, Hazard Management · NAT · 2 marks
- FN · Q54A processor has 64 registers and uses 16-bit instruction format. It has two types of instructions: I-type and R-type. Each I-type instruction contains an opcod…Machine Instructions & Addressing Modes · NAT · 2 marks
2019 2 questions · 3 marks
- FN · Q11A certain processor uses a fully associative cache of size 16 kB. The cache block size is 16 bytes. Assume that the main memory is byte addressable and uses a…Memory Hierarchy · MCQ · 1 mark
- FN · Q55A certain processor deploys a single-level cache. The cache block size is 8 words and the word size is 4 bytes. The memory system uses a 60 MHz clock. To servi…Memory Hierarchy · NAT · 2 marks
2018 6 questions · 9 marks
- FN · Q15Consider the following processor design characteristics. I. Register-to-register arithmetic operations only II. Fixed-length instruction format III. Hardwired…ALU, Control Unit Design, Data-Path Operations · MCQ · 1 mark
- FN · Q19The following are some events that occur after a device controller issues an interrupt while process L is under execution. (P) The processor pushes the process…I/O Interfaces · MCQ · 1 mark
- FN · Q33A 32-bit wide main memory unit with a capacity of 1 GB is built using 256M 4-bit DRAM chips. The number of rows of memory cells in the DRAM chip is 2 14 . The…Main Memory & Virtual Memory Mechanics · NAT · 1 mark
- FN · Q44The size of the physical address space of a processor is 2 P bytes. The word length is 2 W bytes. The capacity of cache memory is 2 N bytes. The size of each c…Memory Hierarchy · MCQ · 2 marks
- FN · Q60The instruction pipeline of a RISC processor has the following stages: Instruction Fetch (IF), Instruction Decode (ID), Operand Fetch (OF), Perform Operation (…Instruction Pipelining, Performance, Hazard Management · NAT · 2 marks
- FN · Q61A processor has 16 integer registers (R0, R1, .. , R15) and 64 floating point registers (F0, F1,… , F63). It uses a 2-byte instruction format. There are four c…Machine Instructions & Addressing Modes · NAT · 2 marks
2017 9 questions · 16 marks
- FN · Q11Consider the C struct defined below: c struct data int marks [100]; char grade; int cnumber; ; struct data student; The base address of student is available in…Machine Instructions & Addressing Modes · MCQ · 1 mark
- FN · Q25Consider a two-level cache hierarchy with L 1 and L 2 caches. An application incurs 1.4 memory accesses per instruction on average. For this application, the m…Memory Hierarchy · NAT · 1 mark
- FN · Q49Consider a RISC machine where each instruction is exactly 4 bytes long. Conditional and unconditional branch instructions use PC-relative addressing mode with…Machine Instructions & Addressing Modes · NAT · 2 marks
- FN · Q50Instruction execution in a processor is divided into 5 stages. Instruction Fetch (IF), Instruction Decode (ID), Operand Fetch (OF), Execute (EX) and Write Back…Instruction Pipelining, Performance, Hazard Management · NAT · 2 marks
- FN · Q51Consider a 2-way set associative cache with 256 blocks and uses LRU replacement. Initially the cache is empty. Conflict misses are those misses which occur due…Memory Hierarchy · NAT · 2 marks
- FN · Q54A cache memory unit with capacity of N words and block size of B words is to be designed. If it is designed as a direct mapped cache, the length of the TAG fie…Memory Hierarchy · NAT · 2 marks
- AN · Q29In a two-level cache system, the access times of L 1 and L 2 caches are 1 and 8 clock cycles, respectively. The miss penalty from the L 2 cache to main memory…Memory Hierarchy · MCQ · 2 marks
- AN · Q45The read access times and the hit ratios for different caches in a memory hierarchy are as given below. The read access time of main memory is 90 nanoseconds.…Memory Hierarchy · NAT · 2 marks
- AN · Q53Consider a machine with a byte addressable main memory of 2 32 bytes divided into blocks of size 32 bytes. Assume that a direct mapped cache having 512 cache l…Memory Hierarchy · NAT · 2 marks

